About Munro Commercials
UK Commercial Trailer Sales
Stock Trailers
Order a Trailer
Current Special Offers
After Sales Department
Munro Workshop
Contact | Service Centres

Model: FWB
With Pins & Sockets

Length - outside 13,590mm
Width - outside 2,550mm
Fifth wheel height - outside 1,250mm

Axles & Suspension

3 x BPW All axles on pneumatic suspension


Pressures on axles - 3 x 9,000kg Manufactured design
3 x 8,000kg UK design
Kingpin pressure - 15,000kg

Wheels & Tyres

Tyres 6 x 385/55 R22,5 Continental

Chassis Construction

Chasis made from high quality construction steel St52-3, as a welded construction
Crossmembers made of IPE 80 profile
Side rave made of angle 150x100x10mm
King pin = JOST 2" - mountain in position 1600mm
Two kingpin back-plates 1300-1600mm
Supporting legs as a crossmembers welded C profile with holes
Main beams made of top and bottom belt 160 x 12mm
Additional reinforcing from the rubbing plate to the supporting legs x 12 mm thickness
10 x pockets for posts welded to sides
2 x pockets for posts prepared for bolting to chassis as extras
20 x posts galvanised made 80x40x4mm, 2,500mm length with 750mm reinforced from the bottom
2 x pockets on rear welded near outside of main beams
Rear bumper made of 100x100x4mm box section

Front Wall

Front wall construction 980mm high (corner profiles and front omega profiles) steel adjusted to hold two rows of posts

Pneumatic Installation

Raise and lower valve H-S mounted after rear axle on the left side
Air tanks 3x60 1 mounted across trailer
Water drains on steel line wired on the left side of main beams - separate line for each air tank

Brake Installation

WABCO installation with EBS/ABS acc to REG 13.09 EKG ONZ
Axles with drum brakes - BPW Eco Plus suspension
Automatic pneumatic parking brake
EBS sensor on centre axle

Electric Installation

Side marking lights acc to REG 48.00 EKG ONZ
Square plastic undercover for registration plates - with one top light


Steel construction blasted (bacc to Sa 2.5 wg ISO-8501) painted using two pack system, 1 x prime coat, 2 x top coat achieving minimum thickness 120mu. Chassis painted in RAL code; drums not painted
Air tanks in trailer colour
Wheel rims in silver
Posts galvanise treated


Two gear supporting legs - JOST or HAACON with longer holding plate, operated from left side - mounted on the highest position (fifth wheel 1250mm)
Aluminium side guards acc to REG 73 EKG ONZ
Rear marker plate x 2
Mudguards - Boydell Jacks PVC 90 degree in black
Rear mudguards with flaps - with pins from inside - Boydell Jacks


28 mm Keruing Hardwood Floor

Back to Polski

Cafrime LeciTrailer
Nicolas Glass
W Trailer Co.
Keith Walking Floor
Fridge Trailers
Walking Floor Trailers
Heavy Duty Flat Bed
Terminal Tractors
Road Transport Vehicles
Curtainside Trailers
Smooth Side Heavy Waste
  © Copyright Munro Commercials Limited. Terms of Use. Accessibility.